eMMC_tool Suite ver. 1.5.3.0 (release date: 28.12.2018)
Microsoft Windows 10 (64 bit) build 17763 (10.0.17763.1)
Looking for EasyJTAG box...
EasyJTAG API ver. 2201
EasyJTAG Box Serial = 11D53C84B69F869C
Card Serial = AA17B3B3
EasyJTAG Box Firmware = 2.31
Changelog:
28.12.2018 (ver 1.5.3.0)
Fix: Bugs that have been found through your crash report
Fix: Scatter file processing (MTK)
Fix: Contact Extractor
Fix: Preloader parser
Fix: FAT partitions mounting
Fix: Minor interface changes
Add: Explorer: Work with Qualcomm HS-USB QDLoader 9008 interface
Add: Reset FRP via Qualcomm HS-USB QDLoader 9008 interface (General - Advanced - Remove FRP)
Add: Remove Android locks via Qualcomm HS-USB QDLoader 9008 interface (General - Advanced - Remove Android Locks)
Add: Auto/Manual loaders select for Qualcom HS-USB QDLoader 9008 interface
Add: Samsung firmware lz4 unpack support (Write by vendor - Samsung)
Add: Import from cm2qlm xml backups (Write by vendor - Qualcomm)
Add: Unpack Bootloader.img archive from Motorola firmware files
Add: Import GP partition parameters from ExtCSD backups (General - eMMC HW Partitions)
Add: Import Boot and RPMB sizes from ExtCSD backups (General - eMMC HW Partitions)
Add: Allow to create a GP with zero size (fix "Error writing at address: 000000000000", fine for Samsung eMMC, and may be destroy SanDisk and other eMMC)
Add: Explorer: Pin and Password decoding (only English and Russian letters)
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_203539.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: prodnv, [000000100000 - 000000600000], size: 000000500000 (5.00 MB)
Partition: miscdata, [000000600000 - 000000700000], size: 000000100000 (1.00 MB)
Partition: wmodem, [000000700000 - 000001600000], size: 000000F00000 (15.0 MB)
Partition: wdsp, [000001600000 - 000001800000], size: 000000200000 (2.00 MB)
Partition: wfixnv1, [000001800000 - 000001900000], size: 000000100000 (1.00 MB)
Partition: wfixnv2, [000001900000 - 000001A00000], size: 000000100000 (1.00 MB)
Partition: wruntimenv1, [000001A00000 - 000001B00000], size: 000000100000 (1.00 MB)
Partition: wruntimenv2, [000001B00000 - 000001C00000], size: 000000100000 (1.00 MB)
Partition: wcnmodem, [000001C00000 - 000001D00000], size: 000000100000 (1.00 MB)
Partition: wcnfixnv1, [000001D00000 - 000001E00000], size: 000000100000 (1.00 MB)
Partition: wcnfixnv2, [000001E00000 - 000001F00000], size: 000000100000 (1.00 MB)
Partition: wcnruntimenv1, [000001F00000 - 000002000000], size: 000000100000 (1.00 MB)
Partition: wcnruntimenv2, [000002000000 - 000002100000], size: 000000100000 (1.00 MB)
Partition: logo, [000002100000 - 000002200000], size: 000000100000 (1.00 MB)
Partition: fbootlogo, [000002200000 - 000002300000], size: 000000100000 (1.00 MB)
Partition: boot, [000002300000 - 000003400000], size: 000001100000 (17.0 MB)
Partition: system, [000003400000 - 000067400000], size: 000064000000 (1.56 GB)
Partition: persist, [000067400000 - 000067600000], size: 000000200000 (2.00 MB)
Partition: cache, [000067600000 - 000070C00000], size: 000009600000 (150. MB)
Partition: recovery, [000070C00000 - 000071B00000], size: 000000F00000 (15.0 MB)
Partition: misc, [000071B00000 - 000071C00000], size: 000000100000 (1.00 MB)
Partition: sysinfo, [000071C00000 - 000072200000], size: 000000600000 (6.00 MB)
Partition: userdata, [000072200000 - 0000E8FFBE00], size: 000076DFBE00 (1.86 GB)
GPT header successfully parsed
Get firmware version
Brand = HOTWAV
Manufacturer = HOTWAV
Device = sp7731c_c7367_fwvga
Model = Venus_R8
Phone platform = sc8830
CPU Abi = armeabi-v7a
Android release = 6.0
Firmware version = C7367_HWD_R8_BengalHOTWAV_324_FW_NOGPS_B1_V01.01.B05
Firmware date = 2017幓 07ę 07ę„ ęęäŗ 13:50:20 CST
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_203607.extcsd
EMMC Init completed.
Operation: Find table from emmc
Vendor: Spreadtrum
Searching GPT ...
GPT header is found and is valid
Checking for ROM2 ...
ROM2 is not blank
Checking for ROM3 ...
ROM3 is blank
GPT header successfully parsed
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_203651.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: prodnv, [000000100000 - 000000600000], size: 000000500000 (5.00 MB)
Partition: miscdata, [000000600000 - 000000700000], size: 000000100000 (1.00 MB)
Partition: wmodem, [000000700000 - 000001600000], size: 000000F00000 (15.0 MB)
Partition: wdsp, [000001600000 - 000001800000], size: 000000200000 (2.00 MB)
Partition: wfixnv1, [000001800000 - 000001900000], size: 000000100000 (1.00 MB)
Partition: wfixnv2, [000001900000 - 000001A00000], size: 000000100000 (1.00 MB)
Partition: wruntimenv1, [000001A00000 - 000001B00000], size: 000000100000 (1.00 MB)
Partition: wruntimenv2, [000001B00000 - 000001C00000], size: 000000100000 (1.00 MB)
Partition: wcnmodem, [000001C00000 - 000001D00000], size: 000000100000 (1.00 MB)
Partition: wcnfixnv1, [000001D00000 - 000001E00000], size: 000000100000 (1.00 MB)
Partition: wcnfixnv2, [000001E00000 - 000001F00000], size: 000000100000 (1.00 MB)
Partition: wcnruntimenv1, [000001F00000 - 000002000000], size: 000000100000 (1.00 MB)
Partition: wcnruntimenv2, [000002000000 - 000002100000], size: 000000100000 (1.00 MB)
Partition: logo, [000002100000 - 000002200000], size: 000000100000 (1.00 MB)
Partition: fbootlogo, [000002200000 - 000002300000], size: 000000100000 (1.00 MB)
Partition: boot, [000002300000 - 000003400000], size: 000001100000 (17.0 MB)
Partition: system, [000003400000 - 000067400000], size: 000064000000 (1.56 GB)
Partition: persist, [000067400000 - 000067600000], size: 000000200000 (2.00 MB)
Partition: cache, [000067600000 - 000070C00000], size: 000009600000 (150. MB)
Partition: recovery, [000070C00000 - 000071B00000], size: 000000F00000 (15.0 MB)
Partition: misc, [000071B00000 - 000071C00000], size: 000000100000 (1.00 MB)
Partition: sysinfo, [000071C00000 - 000072200000], size: 000000600000 (6.00 MB)
Partition: userdata, [000072200000 - 0000E8FFBE00], size: 000076DFBE00 (1.86 GB)
GPT header successfully parsed
Get firmware version
Brand = HOTWAV
Manufacturer = HOTWAV
Device = sp7731c_c7367_fwvga
Model = Venus_R8
Phone platform = sc8830
CPU Abi = armeabi-v7a
Android release = 6.0
Firmware version = C7367_HWD_R8_BengalHOTWAV_324_FW_NOGPS_B1_V01.01.B05
Firmware date = 2017幓 07ę 07ę„ ęęäŗ 13:50:20 CST
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_203712.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_203911.extcsd
EMMC Init completed.
Operation: Erasing eMMC...
Erasing for: ROM1 , start: 0x000000000000 , size: 0x0000E9000000
eMMC switching to ROM1
Erasing partition...
Done erasing partition.
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204148.extcsd
EMMC Init completed.
Opening file: SP7731CEB_sp7731c_c7367_fwvga_6.0_C7367_HWD_R8_BengalHOTWAV_324_FW_NOGPS_B1_V01.01.B05_Venus_R8.pac
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204231.extcsd
EMMC Init completed.
Opening file: C7367_HWD_R8_BengalHOTWAV_324_FW_NOGPS_B1_V01.01.B05.pac
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204234.extcsd
EMMC Init completed.
Operation: Write by vendor (Spreadtrum)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Too many errors. Writing has been stopped
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204252.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204403.extcsd
EMMC Init completed.
Operation: Reading GP sizes from ExtCSD backup
Filename: H4G1d_00A21FAA_20190531_204403.extcsd
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H4G1d_00A21FAA_20190531_204434.extcsd
EMMC Init completed.
Operation: Changing GP sizes (final write) ...
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP2 size: 0 MB , WR_REL: 1 , ENH 0
GP3 size: 0 MB , WR_REL: 1 , ENH 0
GP4 size: 0 MB , WR_REL: 1 , ENH 0
Zero sizes. This may damage your eMMC
Do you want to continue?
Successfully
Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0] to finalize operation
After reconnect, make sure that the size of ROM1 has been changed.
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_00A21FAA_20190531_204513.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_00A21FAA_20190531_204726.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 21 Mhz
EMMC Device Information :
EMMC CID: 90014A4834473164040500A21FAAC131
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 00A21FAA , rev. 0x05
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_00A21FAA_20190531_204758.extcsd
EMMC Init completed.
No comments:
Post a Comment