Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 14 Mhz
EMMC Device Information :
EMMC CID: 1501004E3957524D420190CA8AE290DF
EMMC CSD: D02701320F5A037FF6DBFFEF964040A9
EMMC Manufacture : SAMSUNG , EMMC NAME: N9WRMB , HEX: 4E3957524D42 , S/N: 90CA8AE2 , rev. 0x01
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2013
EMMC ROM 1 (Main User Data) Capacity: 1792 MB (000070000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: N9WRMB_90CA8AE2_20190424_222044.extcsd
EMMC Init completed.
Get firmware version
Stopped by User request...
Brand = alps
Manufacturer = alps
Model = Symphony Xplorer W32
CPU Abi = armeabi-v7a
Mediatek platform = MT6572
Android release = 4.2.2
Firmware version = W32_1_FL1_V01.2_V2.0
Firmware date = Wed Nov 6 11:42:39 CST 2013
Setting bus width to 1 Bit
Setting frequence to 14 Mhz
EMMC Device Information :
EMMC CID: 1501004E3957524D420190CA8AE290DF
EMMC CSD: D02701320F5A037FF6DBFFEF964040A9
EMMC Manufacture : SAMSUNG , EMMC NAME: N9WRMB , HEX: 4E3957524D42 , S/N: 90CA8AE2 , rev. 0x01
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2013
EMMC ROM 1 (Main User Data) Capacity: 1792 MB (000070000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: N9WRMB_90CA8AE2_20190424_222044.extcsd
EMMC Init completed.
Get firmware version
Stopped by User request...
Brand = alps
Manufacturer = alps
Model = Symphony Xplorer W32
CPU Abi = armeabi-v7a
Mediatek platform = MT6572
Android release = 4.2.2
Firmware version = W32_1_FL1_V01.2_V2.0
Firmware date = Wed Nov 6 11:42:39 CST 2013
No comments:
Post a Comment